GUIDE SPECIFICATIONS FOR THE DERO SURFACE MOUNTED 3V BIKE RACK
SECTION 02871
BIKE RACKS
These specifications were current at the time of publication but are subject to change at any time without notice. Please confirm the accuracy of these specifications with the manufacturer and/or distributor prior to installation.
PART 1 GENERAL
1.1 Summary
This section includes specifications for the Surface Mounted 3V Bike Rack.
Bikes parked per unit: 3
1.2 Quality Assurance
Installer Qualifications: An experienced installer who has completed installation of bicycle racks similar in material, design, and extent to that indicated for this project and whose work has resulted in construction with a record of successful in-service performance.
Manufacturer Qualifications: A firm experienced in manufacturing bicycle racks similar to those required for this project and with a record of successful in-service performance.
Source Limitations: Obtain each color, finish, shape and type of bicycle rack from a single source with resources to provide components of consistent quality in appearance and physical properties.
Product Options: Drawings indicate size, shape and dimensional requirements of bicycle racks and are based on the specific system indicated.
1.3 Submittals
Product Data: Include physical characteristics such as shape, dimensions, bicycle, material parking capacity and finish for each bicycle rack.
Shop Drawings: Show installation details for each bicycle rack.
Samples for Verification: Submit finish samples for review and verification.
Maintenance Data: For each bicycle rack.
Include recommended methods for repairing damage to the finish.
1.4 Delivery, Storage and Handling
Upon delivery, before signing for shipment, inspect for any damages and notate on the B.O.L.
Store bicycle racks in original undamaged packages and containers until ready for installation. Handle bicycle racks with sufficient care to prevent any scratches or damage to the finish.
PART 2 PRODUCTS
2.1 Acceptable Manufacturers
Provide bicycle racks manufactured by DERO BIKE RACK CO., 2657 32nd Avenue S, Minneapolis, MN 55406, 1-800-298-4915. Fax: 612-331-2731 Website: www.dero.com
2.2 Materials
A. 1.5" 11g uncoated tube.
B. Surface Mount has two 4" diameter x .25" feet - 4 anchors.
2.3 Finishes
A. Finish: A hot-dipped galvanized finish is standard. Over 250 high quality TGIC powder-coated colors are available from Dero Bike Rack Co.
2.4 3V Bike Rack
A. Setbacks
Wall Setback: For racks set parallel to the wall, a minimum of 24" should be left between the wall and the rack. 36" is the recommended setback. For racks installed perpendicular to the wall, a 34" setback is the minimum distance. 42" is recommended.
Distance Between Racks: 24" is the minimum distance between racks. 36" is recommended.
Street Setback: 24" is the minimum distance between the street and the rack. 36" is recommended.
PART 3 EXECUTION
3.1 Installation
Installation Method
Surface mount
It is the responsibility of the installer to ensure that all base materials into which the rack will be installed can support the rack and will not be damaged by any required installation procedures.
3.2 Ordering Information
When ordering or specifying this rack, make sure the product type, finish and fastener type (if applicable) are included. Contact your Dero representative for a current price list or to place an order.
3.3 Freight
Call 1-800-298-4915 for freight quotes.