Dero Bike Racks, Inc.
2657 32nd Avenue S. Minneapolis, MN 55406
Phone: 888-337-6729 Fax: 612-331-2731
E-mail: sales@dero.com Website: http://www.dero.com
GUIDE SPECIFICATIONS FOR THE DERO DECKER BIKE RACK.
SECTION 02871
BIKE RACKS
These specifications were current at the time of publication but are subject to change at any time without notice. Please confirm the accuracy of these specifications with the manufacturer and/or distributor prior to installation.
PART 1 GENERAL
1.1 Summary
A. This section includes specifications for the Dero Decker Bike Rack.
1. Bikes parked per unit:
Singlesided: 4, 8, 12
Doublesided: 8, 16, 24
1.2 Quality Assurance
A. Installer Qualifications: An experienced installer who has completed installation of bicycle racks similar in material, design, and extent to that indicated for this project and whose work has resulted in construction with a record of successful in-service performance.
B. Manufacturer Qualifications: A firm experienced in manufacturing bicycle racks similar to those required for this project and with a record of successful in-service performance.
C. Source Limitations: Obtain each color, finish, shape and type of bicycle rack from a single source with resources to provide components of consistent quality in appearance and physical properties.
D. Product Options: Drawings indicate size, shape and dimensional requirements of bicycle racks and are based on the specific system indicated.
1.3 Submittals
A. Product Data: Include physical characteristics such as shape, dimensions, bicycle parking capacity and finish for each bicycle rack.
B. Shop Drawings: Show installation details for each bicycle rack.
C. Maintenance Data: For each bicycle rack.
1. Include recommended methods for repairing damage to the powder coat finish.
1.4 Delivery, Storage and Handling
A. Upon delivery, before signing for shipment, inspect for any damages and notate on the B.O.L.
B. Store bicycle racks in original undamaged packages and containers until ready for installation. Handle bicycle racks with sufficient care to prevent any scratches or damage to the finish.
1.5 Warranty
Bicycle racks carry a one year manufacturer’s limited warranty against defects in materials and workmanship. The one year warranty period begins the date the product is shipped from the manufacturer.
PART 2 PRODUCTS
2.1 Acceptable Manufacturers
A. Provide bicycle racks manufactured by DERO BIKE RACK CO., 2657 32nd Avenue S., Minneapolis, MN 55406, ph: 888-337-6729.
2.2 Materials
Uprights: 4” 12g square tube
Upright base: 1/4” plate
Crossbar: 4” 7g square tube
Cantilevers: 2” x 4” 11g tube
Cantilever base: 1/4” plate
Trays: 1/8” plate, ½” round bar
2.3 Finishes
A. Finish: A hot-dipped galvanized finish is standard. Over 250 high quality TGIC powder-coated colors are available from Dero Bike Rack Co.
2.4 Ad Bike Rack
A. Setbacks
Please see setback diagrams.
PART 3 EXECUTION
3.1 Installation
A. When ordering or specifying this rack, make sure the product type, finish and fastener type (if applicable) are included. Contact your Dero representative for a current price list or to place an order.
B. It is the responsibility of the installer to ensure that all base materials into which the rack will be installed can support the rack and will not be damaged by any required installation procedures.
3.2 Freight
A. Call 1-800-298-4915 for freight quotes.
END OF SECTION