GUIDE SPECIFICATIONS FOR THE DERO DOWNTOWN BIKE RACK
SECTION 02871
BIKE RACKS

These specifications were current at the time of publication but are subject to change at any time without notice. Please confirm the accuracy of these specifications with the manufacturer and/or distributor prior to installation.

PART 1 GENERAL

1.1 Summary

This section includes specifications for the Downtown Bike Rack.

Bikes parked per unit: 2

1.2 Quality Assurance

Installer Qualifications: An experienced installer who has completed installation of bicycle racks similar in material, design, and extent to that indicated for this project and whose work has resulted in construction with a record of successful in-service performance.

Manufacturer Qualifications: A firm experienced in manufacturing bicycle racks similar to those required for this project and with a record of successful in-service performance.

Source Limitations: Obtain each color, finish, shape and type of bicycle rack from a single source with resources to provide components of consistent quality in appearance and physical properties.

Product Options: Drawings indicate size, shape and dimensional requirements of bicycle racks and are based on the specific system indicated.

1.3 Submittals

Product Data: Include physical characteristics such as shape, dimensions, bicycle, material parking capacity and finish for each bicycle rack.

Shop Drawings: Show installation details for each bicycle rack.

Samples for Verification: Submit finish samples for review and verification.

Maintenance Data: For each bicycle rack.

Include recommended methods for repairing damage to the finish.

1.4 Delivery, Storage and Handling

Upon delivery, before signing for shipment, inspect for any damages and notate on the B.O.L.
Store bicycle racks in original undamaged packages and containers until ready for installation. Handle bicycle racks with sufficient care to prevent any scratches or damage to the finish.

PART 2 PRODUCTS 

2.1 Acceptable Manufacturers

Provide bicycle racks manufactured by DERO BIKE RACK CO., 2657 32nd Avenue S, Minneapolis, MN 55406, 1-800-298-4915. Fax: 612-331-2731 Website: www.dero.com

B. Part Number is DT-

2.2 Materials

2” 11g uncoated square tube.

Installation Methods: In-ground mount is embedded into concrete base. Flange mount has two 2.5" x 6" x .25" feet - 4 anchors. In-ground mount, foot mount, and rail mount models are available

2.3 Finishes

A. Finish:  A hot-dipped galvanized finish is standard. Over 250 high quality TGIC powder-coated colors are available from Dero Bike Rack Co.

2.4 Downtown Bike Rack

A. Setbacks

Wall Setback: For racks set parallel to the wall, a minimum of 24" should be left between the wall and the rack. 36" is the recommended setback. For racks installed perpendicular to the wall, a 34" setback is the minimum distance. 42" is recommended.

Distance Between Racks: 24" is the minimum distance between racks. 36" is recommended.

Street Setback: 24" is the minimum distance between the street and the rack. 36" is recommended.

PART 3 EXECUTION

3.1 Ordering Information

A. When ordering or specifying this rack, make sure the product type, finish and fastener type (if applicable) are included. Contact your Dero representative for a current price list or  to place an order.

3.2 Freight

Downtown Racks can be shipped UPS. Some Rail Rack setups can also be shipped UPS. Call 1-800-298-4915 for freight quotes.