GUIDE SPECIFICATIONS FOR THE DERO EVENT BIKE RACK
SECTION 02871 or 129313
BIKE RACKS

These specifications were current at the time of publication but are subject to change at any time without notice. Please confirm the accuracy of these specifications with the manufacturer and/or distributor prior to installation.

PART 1 GENERAL

1.1 Summary

This section includes specifications for the Event Bike Rack.
Bikes parked per unit: 14

1.2 Quality Assurance

Manufacturer Qualifications: A firm experienced in manufacturing bicycle racks similar to those required for this project and with a record of successful in-service performance.
Source Limitations: Obtain each bicycle rack from a single source with resources to provide components of consistent quality in appearance and physical properties.
Product Options: Drawings indicate size, shape and dimensional requirements of bicycle racks and are based on the specific system indicated.

1.3 Submittals

Product Data: Include physical characteristics such as shape, dimensions, bicycle parking capacity and finish for each bicycle rack.
Shop Drawings: Show installation details for each bicycle rack.
Samples for Verification: Submit finish samples for review and verification.
Maintenance Data: For each bicycle rack.
Include recommended methods for repairing damage to the finish.

1.4 Delivery, Storage and Handling

Upon delivery, before signing for shipment, inspect for any damages and notate on the B.O.L.
Store bicycle racks in original undamaged packages and containers until ready for installation
Handle bicycle racks with sufficient care to prevent any scratches or damage to the finish.

PART 2 PRODUCTS 

2.1 Acceptable Manufacturers

Provide bicycle racks manufactured by DERO BIKE RACK CO., 2657 32nd Avenue S, Minneapolis, MN 55406, 1-800-298-4915. Fax: 612-331-2731 Website: HYPERLINK "http://www.dero.com" www.dero.com
The Event Rack is U-Lock Compatible, allowing bike frame and wheel to be secured with one U-lock.

2.2 Materials

.75” 11g uncoated round tube.

2.3 Finishes

A hot-dipped galvanized finish performed after fabrication is standard.

2.4 Event Bike Rack

Space Use 

Bikes will be locked perpendicular to the Event Rack as shown in the diagrams. When bikes are locked to it, the Event Rack will use approximately the amount of space listed in the installation diagrams.

To ensure that the Event Rack is convenient and safe for bicyclists, use these minimum space use configurations when installing an Event Rack next to a wall or street, or if you are putting several Event Racks next to each other.

Event racks must be stackable for storage so that 10 units stacked together will occupy space no greater than 48” high by 48” wide by 120” long.

Setbacks 

Wall Setback: A minimum of 60" should be left between the wall and the long side of the rack and 24” between the wall and the short side of the rack.
Street Setback: For racks running parallel to the street, a 75" setback is recommended. For racks installed perpendicular to the street a 24" setback is the minimum setback distance between the street and the rack. 36" is recommended.

PART 3 EXECUTION

3.1 Installation

The Event Rack is freestanding and can be placed anywhere there is adequate space.

3.2 Ordering Information

Contact your Dero representative for a current price list or to place an order.

3.3 Included with every Bike Rack

Included in the price is a hot-dipped galvanized finish.

3.4 Freight

Call 1-800-294-4915 for freight quotes.