GUIDE SPECIFICATIONS FOR THE DERO HI ROLLER BIKE RACK 2H

SECTION 02871

BIKE RACKS

These specifications were current at the time of publication but are subject to change at any time without notice. Please confirm the accuracy of these specifications with the manufacturer and/or distributor prior to installation.

PART 1 GENERAL

1.1 Summary

A. This section includes specifications for the Surface Mounted Hi Roller 2H.
        1. Bikes parked per unit: 4

1.2 Quality Assurance

A. Installer Qualifications: An experienced installer who has completed installation of bicycle racks similar in material, design, and extent to that indicated for this project and whose work has resulted in construction with a record of successful in-service performance.

B. Manufacturer Qualifications: A firm experienced in manufacturing bicycle racks similar to those required for this project and with a record of successful in-service performance.

C. Source Limitations: Obtain each color, finish, shape and type of bicycle rack from a single source with resources to provide components of consistent quality in appearance and physical properties.

D. Product Options: Drawings indicate size, shape and dimensional requirements of bicycle racks and are based on the specific system indicated.

1.3 Submittals

A. Product Data: Include physical characteristics such as shape, dimensions, bicycle parking capacity and finish for each bicycle rack.

B. Shop Drawings: Show installation details for each bicycle rack.

C. Samples for Verification: Submit finish samples for review and verification.

D. Maintenance Data: For each bicycle rack.
        1. Include recommended methods for repairing damage to the powder coat finish.

1.4 Delivery, Storage and Handling

A. Upon delivery, before signing for shipment, inspect for any damages and notate on the B.O.L.

B. Store bicycle racks in original undamaged packages and containers until ready for installation. Handle bicycle racks with sufficient care to prevent any scratches or damage to the finish.

PART 2 PRODUCTS

2.1 Acceptable Manufacturers

A. Provide bicycle racks manufactured by DERO BIKE RACK CO., 2657 32nd Avenue S., Minneapolis, MN 55406, ph: 1-800-298-4915. Fax: 612-331-2731 website: www.dero.com

B. Part Number is Hi2H-

2.2 Materials

A. 2.375 " OD schedule 40 pipe.

B. Surface Mount has two 5" x 6" x .25" feet - 8 anchors. In ground mount is embedded into concrete base. Freestanding has two galvanized steel channels.

2.3 Finishes

A. Finish:  A hot-dipped galvanized finish is standard. Over 250 high quality TGIC powder-coated colors are available from Dero Bike Rack Co.

2.4 Hi Roller

A. Setbacks

1. Wall Setback: For racks set parallel to the wall, a minimum of 27" should be left between the wall and the rack. 36" is the recommended setback. For racks installed perpendicular to the wall, a 34" setback is the minimum distance. 42" is recommended.

2. Distance Between Racks: 24" is the minimum distance between racks. 36" is recommended.

3. Street Setback: For racks set parallel to the street, a 96” setback is recommended. For racks installed perpendicular to the street, 24” is the minimum setback. 36” is recommended.

PART 3 EXECUTION

3.1 Ordering Information

A. When ordering or specifying this rack, make sure the product type, finish and fastener type (if applicable) are included. Contact your Dero representative for a current price list or  to place an order.

3.2 Freight

A. Some Hi Rollers can be shipped UPS. Call 1-800-298-4915 for freight quotes.

END OF SECTION