GUIDE SPECIFICATIONS FOR THE DERO ROLLING RACK 2H

SECTION 02871

BIKE RACKS

These specifications were current at the time of publication but are subject to change at any time without notice. Please confirm the accuracy of these specifications with the manufacturer and/or distributor prior to installation.

PART 1 GENERAL

1.1 Summary

A. This section includes specifications for the Surface Mounted Rolling Rack 2H.
        1. Bikes parked per unit: 5

1.2 Quality Assurance

A. Installer Qualifications: An experienced installer who has completed installation of bicycle racks similar in material, design, and extent to that indicated for this project and whose work has resulted in construction with a record of successful in-service performance.

B. Manufacturer Qualifications: A firm experienced in manufacturing bicycle racks similar to those required for this project and with a record of successful in-service performance.

C. Source Limitations: Obtain each color, finish, shape and type of bicycle rack from a single source with resources to provide components of consistent quality in appearance and physical properties.

D. Product Options: Drawings indicate size, shape and dimensional requirements of bicycle racks and are based on the specific system indicated.

1.3 Submittals

A. Product Data: Include physical characteristics such as shape, dimensions, bicycle parking capacity and finish for each bicycle rack.

B. Shop Drawings: Show installation details for each bicycle rack.

C. Maintenance Data: For each bicycle rack.
        1. Include recommended methods for repairing damage to the powder coat finish.

1.4 Delivery, Storage and Handling

A. Store bicycle racks in original undamaged packages and containers until ready for installation.

B. Handle bicycle racks with sufficient care to prevent any scratches or damage to the finish.

PART 2 PRODUCTS

2.1 Acceptable Manufacturers

A. Provide bicycle racks manufactured by DERO BIKE RACK CO., 2657 32nd Avenue S., Minneapolis, MN 55406, ph: 888-337-6729.

B. Part Number is RR2H-

2.2 Materials

A. 2.375 " OD schedule 40 pipe.

B. Surface Mount has two 5" x 6" x .25" feet - 8 anchors. In ground mount is embedded into concrete base. Freestanding has two galvanized steel channels.

2.3 Finishes

A. Finish:  A hot-dipped galvanized finish is standard. Over 250 high quality TGIC powder-coated colors are available from Dero Bike Rack Co.

2.4 Rolling Rack

A. Space Use

1. Bikes will be locked perpendicular to the Rolling Rack. When bikes are locked to it, the Rolling Rack 2H will use approximately 75" x 24" of space.

2. To ensure that the Rolling Rack is convenient and safe for bicyclists, use minimum space use configurations when installing a Rolling Rack next to a wall or street, or if you are putting several Rolling Racks next to each other.

B. Setbacks

1. Wall Setback: For Rolling Racks set parallel to the wall, a minimum of 24" should be left between the wall and the rack. 36" is the recommended setback.

2. Street Setback: For racks running parallel to the street, a 96" setback is recommended. For racks installed perpendicular to the street a 24" setback is the minimum setback distance between the street and the rack. 36" is recommended.

PART 3 EXECUTION

3.1 Ordering Information

A. When ordering or specifying this rack, make sure the product type, finish and fastener type (if applicable) are included. Contact your Dero representative for a current price list or  to place an order.

3.2 Freight

A. Some Rolling Racks can be shipped UPS. Call 1-888-337-6729 for freight quotes.

END OF SECTION