GUIDE SPECIFICATIONS FOR THE DERO SPACE SAVER RACK

SECTION 02871

BIKE RACKS

These specifications were current at the time of publication but are subject to change at any time without notice. Please confirm the accuracy of these specifications with the manufacturer and/or distributor prior to installation.

PART 1 GENERAL

1.1 Summary

A. This section includes specifications for the Dero Space Saver Rack.
        1. Modular system: 1 bike per hanger

1.2 Quality Assurance

A. Installer Qualifications: An experienced installer who has completed installation of bicycle racks similar in material, design, and extent to that indicated for this project and whose work has resulted in construction with a record of successful in-service performance.

B. Manufacturer Qualifications: A firm experienced in manufacturing bicycle racks similar to those required for this project and with a record of successful in-service performance.

C. Source Limitations: Obtain each color, finish, shape and type of bicycle rack from a single source with resources to provide components of consistent quality in appearance and physical properties.

D. Product Options: Drawings indicate size, shape and dimensional requirements of bicycle racks and are based on the specific system indicated.

1.3 Submittals

A. Product Data: Include physical characteristics such as shape, dimensions, bicycle parking capacity and finish for each bicycle rack.

B. Shop Drawings: Show installation details for each bicycle rack.

C. Maintenance Data: For each bicycle rack.
        1. Include recommended methods for repairing damage to the powder coat finish.

1.4 Delivery, Storage and Handling

A. Store bicycle racks in original undamaged packages and containers until ready for installation.

B. Handle bicycle racks with sufficient care to prevent any scratches or damage to the finish.

PART 2 PRODUCTS

2.1 Acceptable Manufacturers

A. Provide bicycle racks manufactured by DERO BIKE RACK CO., 2657 32nd Avenue S., Minneapolis, MN 55406, ph: 888-337-6729.

2.2 Materials

A. Hanger is 1" OD 11 gauge with 3/8" steel rod.

B. Upright is 2" x 2" HSLA gauge square tube.

2.3 Finishes

A. Finish:  Body is black TGIC powder-coat (standard). Hanger rod is black baked on rubber coating, crossbars are galvanized.

1. Powder coat finishes are applied over an electrostatically applied epoxy primer.

PART 3 EXECUTION

3.1 Ordering Information

A. When ordering or specifying this rack, make sure the product type, finish and fastener type (if applicable) are included. Contact your Dero representative for a current price list or  to place an order.

B. Included in the price is a black TGIC powder coat finish for the hanger arms, wall mounts and uprights. The crossbeams and feet are galvanized.

3.2 Freight

A. Space Saver Racks can be shipped UPS. Call 1-888-337-6729 for freight quotes.

END OF SECTION