Dero Bike Racks, Inc.
2657 32nd Avenue S. Minneapolis, MN 55406
Phone: 888-337-6729 Fax: 612-331-2731
E-mail: sales@dero.com Website: http://www.dero.com
GUIDE SPECIFICATIONS FOR THE DERO ULTRA SPACE SAVER BIKE RACK
SECTION 02871 or 129313
BIKE RACKS
These specifications were current at the time of publication but are subject to change at any time without notice. Please confirm the accuracy of these specifications with the manufacturer and/or distributor prior to installation.
PART 1 GENERAL
1.1 Summary
A. This section includes specifications for the Dero Ultra Space Saver Bike Rack.
1. Modular System - One bike per hanger
1.2 Quality Assurance
A. Installer Qualifications: An experienced installer who has completed installation of bicycle racks similar in material, design, and extent to that indicated for this project and whose work has resulted in construction with a record of successful in-service performance.
B. Manufacturer Qualifications: A firm experienced in manufacturing bicycle racks similar to those required for this project and with a record of successful in-service performance.
C. Source Limitations: Obtain each color, finish, shape and type of bicycle rack from a single source with resources to provide components of consistent quality in appearance and physical properties.
D. Product Options: Drawings indicate size, shape and dimensional requirements of bicycle racks and are based on the specific system indicated.
1.3 Submittals
A. Product Data: Include physical characteristics such as shape, dimensions, bicycle parking capacity and finish for each bicycle rack.
B. Maintenance Data: For each bicycle rack.
1. Include recommended methods for repairing damage to the powder coat finish.
1.4 Delivery, Storage and Handling
A. Store bicycle racks in original undamaged packages and containers until ready for installation.
B. Handle bicycle racks with sufficient care to prevent any scratches or damage to the finish.
PART 2 PRODUCTS
2.1 Acceptable Manufacturers
A. Provide bicycle racks manufactured by DERO BIKE RACK CO., 2657 32nd Avenue S., Minneapolis, MN 55406, ph: 888-337-6729.
2.2 Materials
A. Hanger is 1" OD 11 gauge tube with 3/8" steel round bar.
B. Upright is 2" x 2" x 3/16” square tube.
C. Feet are AISI C3 x 4.1 galvanized steel channel.
D. Crossbeams are 1.25” schedule 40 galvanized pipe (1.660” OD)
E. Spacers are 2.375” OD plastic tubes with .218” wall thickness.
2.3 Finishes
A. Finish: Body is black TGIC powder-coat (standard). Over 250 high quality TGIC powder-coated colors are available from Dero Bike Rack Co. Hanger rod is black baked-on rubber coating, crossbars are galvanized. A hot-dipped galvanized finish can be special ordered. All powder coat finishes are applied over an electrostatically applied epoxy primer.
2.4 Bike Bike Rack
A. Space Use
1. Bikes will hang vertically from the Ultra Space Saver.
Each Ultra Space Saver uses 16” of lateral space and 44” of depth/bike.
2. Double sided Ultra Space Savers use 88” of depth per 2 bikes.
Allow a minimum of 36” access aisle between occupied Space Savers.
PART 3 EXECUTION
3.1 Installation
A. Floor mounted: the floor mounted Ultra Space Saver has holes in the feet through which to attach 3/8” x 5” wedge anchors.
B. Wall mounted: the wall mounted Ultra Space Savers have two holes through every mounting bracket. Mounting hardware is included.
C. All connections and mounting parts have pre-threaded mounting holes (except the feet). No drilling or tapping required.
D. It is the responsibility of the installer to ensure that all base materials into which the rack will be installed can support the rack and will not be damaged by any required installation procedures.
3.2 Ordering Information
A. When ordering or specifying this rack, make sure the product type, finish and fastener type (if applicable) are included. Contact your Dero representative for a current price list or to place an order.
3.3 Freight
A. Ultra Space Savers are shipped via Truckline. Call 1-888-337-6729 for freight quotes.
END OF SECTION