Product Options

Mounting Options

Most Dero products are available in three following standard mounting options:

surface mount

Surface Mount

Metal flange anchors to the ground with included wedge anchors. Other special anchors such as tamperproof nuts are also available.

in-ground mount

In-Ground Mount

Rack is embedded into concrete surface

freestanding mount

Freestanding Rail Mount

Racks are bolted to rails which may be anchored to surface or left free-standing.

Tamperproof Anchors
breakaway nut

Breakaway Nut

This is a permanent tamper-proof nut for use with a 3/8" wedge anchor or 1/2" sleeve anchor (3/8" threads). The head breaks off leaving a cone. The only way to remove the anchor is by cutting or grinding off the anchor.

stainless tamper proof nut

Stainless Tamperproof Nut

Metal flange anchors to the ground with included wedge anchors. Other special anchors such as tamperproof nuts are also available.

triple slot nut

Triple-Slot Nut

This is a removeable tamper-proof nut for use with a 3/8" wedge anchor or 1/2" sleeve anchor (3/8" threads). The advantage with this nut is its robust construction and ease of use. The disadvantage is the expensive access tool.

concrete spike

Concrete Spike

The concrete spike is a permanent tamper-proof anchor. It is included in the cost of the rack. This anchor can only be used in a solid concrete base material. Although the concrete spike is an inexpensive option, it is not as strong as a wedge anchor, and can be more difficult to install.

Finish Options

Dero offers the following finish options on most products:

galvanized

Galvanized

Hot dipped galvanized is an extremely durable and low cost finish option. The bike racks are hot-dipped galvanized after fabrication and then hand ground to ensure a clean, safe surface. Unless otherwise noted, a hot dipped galvanized finish is included in the cost of all Dero products.

powder coat

Powder Coat

Powder coating provides a durable finish using a solvent-free process that is better for the environment than liquid paints. If our 20 standard colors aren't enough we can match to over 250 custom colors.

Black
White
RAL 7042
Light Gray
RAL 3003
Deep Red
RAL 1023
Yellow
Bright Yellow
RAL 2004
Orange
RAL 5005
Blue
RAL 5015
Sky Blue
RAL 6005
Hunter Green
RAL 6018
Light green
RAL 6016
Green
RAL 8014
Sepia Brown
Bronze
RAL 9007
Silver
Dark Purple
Flat Black
RAL 3005
Wine Red
RAL 1001
Beige
RAL 7011
Iron Gray
thermoplastic

Thermoplastic

Surface preparation for applying a thermoplastic finish is the same as is done with powder coating. Unlike powder coating, no primer is required. The thickness of the thermoplastic finish is more than powder coating, typically from 8 - 10 mils. In addition to an increased thickness, the thermoplastic finish offers superior impact resistance over powder coating.

Black
Blue
Green
Red
Gray
Brown
stainless

Stainless

Stainless steel is the most beautiful and durable option. We use a 304 grade stainless steel which will continue to look new and attractive for many years.

pvc dip

PVC Dip

Dero offers a rubbery, durable PVC coating in a range of colors on many models of bike racks. A rust-inhibiting pre-treatment is applied to the underlying steel before being dipped in UV-stabilized PVC. The coating is subsequently cured to produce a colorful coating that offers excellent protection against abrasion, impact, and corrosion. The PVC coating can be applied to galvanized racks to provide an even greater level of corrosion protection.