Cycle Station

Bike Shelter

Starter Unit Side and Back Panels

Complete installation instructions are also included in the PDF brochure download located in the upper right corner of this page.

1. Place a REAR PANEL in place and clamp it to the UPRIGHT SHORT and UPRIGHT TALL. Using the four ½” holes in the REAR PANEL as a guide, drill through both walls of the UPRIGHTS with a 3/8” drill bit.

2. Bolt the REAR PANEL to the UPRIGHTS with the aluminum spacers in between the REAR PANEL and UPRIGHT.

3. Drill a 1/4” hole in the ground at the slotted hole in the REAR PANNEL foot and secure with a 1/4” wedge anchor. Repeat for the other REAR PANEL.

4. Place the SIDE PANEL in place and clamp it to the UPRIGHTS. Using the four ½” holes in the SIDE PANEL as a guide, drill through both walls of the UPRIGHTS with a 3/8” drill bit.

Bolt the SIDE PANEL to the UPRIGHTS with the aluminum spacers in between the SIDE PANEL and UPRIGHTS.

Repeat for the other SIDE PANEL.