View Cart
Download Space Saver Brochure
The Space Saver has several steps for installation. Note that the single and double sided setups and parts are different. Make sure you follow the instructions according to the model you ordered.
Complete printable instructions are included in the PDF brochure download.
Tools Needed for Installation:
9/16” Wrench/Socket
3/8” Masonry Drill Bit
Tape Measure
Drill (Hammer drill recommended)
Hammer
Recommended Base Materials:
Solid concrete is the best base material for installation. Make sure nothing is underneath the base material that could be damaged by drilling. Use the 3.75” wedge anchors that are included to install the rack into the concrete.
Installation:
Sort out the parts to the rack and identify each of them accordingly. The 1” carriage bolts are for assembly of the rack and the 3.75” wedge anchors are for mounting the rack to the floor.
Install Steps:
- Measure out space. Attach feet to uprights with carriage bolts provided.
- Lay assembled uprights with crossbeams attached on their side so crossbeams are facing up. Slide first hanger arm on. Then slide the plastic spacers on.
- Slide next arm on but make sure to flip each arm so that the hanger rod is at a different level from its neighboring arms. For double sided model slide arms on opposite each other. Repeat until the crossbeams are full. For Single-sided installs place 3” spacer at end (part# SS-Spacer-3”)
- Tip rack up and attach the second upright. Tighten bolts. Slide assembled rack into final location. For add-on units repeat steps.
- Anchor rack to floor with 3.75” wedge anchors.
