Ultra Space Saver Single / installation

Tools Needed for Installation

Tape measure
Marker or pencil
Masonry drill bit 3/8"
Drill (Hammer drill recommended)
Hammer
Wrench 9/16"
Level

Installation

1 Place rack against wall. Mark holes and lower rack.

2 Drill holes 2" deep with 1/2" diameter drill bit. If installing more than one Ultra Space Saver Single, mark holes for each rack individually as there may be slight differences in the placement of holes from rack to rack.

3 Place rack back into positon against wall and tap anchors through holes in the rack and into the wall.

4 Tighten anchors